La plate-forme collaborative de bricolages scientifiques et pédagogiques

Electroquiz

Building an electroquiz is a good way to experiment simple electrical connections.

 

This project is not only technical, the question & answer part can exercise different skills (writing, spelling, drawing, general knowledge, calculation,...).


Difficulté
Facile
Durée
2h
Note
5/5
Prix
~ 8 CHF
Témoignages
0

Matériel
Outils
Chablons&Plans
Réalisation
Cut and strip both ends of the following wires: 2 x 35 cm 1 x approx. 5 cm 5 x approx. 20 cm   Using the soldering iron, add tin ... With the help of the model that you can download in the blueprints/plans section, mark the positions of the holes on the ...Slide 14 brads (brass fasteners) through the slits. With the help of five 20 cm wires, form five pairs left to right of your choice between the ten central brads.   ... Using a soldering iron, solder the 5 cm wire to one side of the battery support and the 35cm one to the other side.   ... Attach the other end of the 5 cm wire to one side of the bulb socket.   Attach the other 35 cm wire to the other socket ... Cut two strips of paper in a A4 sheet as shown on the photo.   They will be used to write down the questions and answers. On one strip of paper, write your five questions at the hight of the brads.   On the other strip of paper, write the ...
Fonctionnement
Liens&Références
Date30.04.2013
AuteurEmmanuelle
Organismeinfo-energie
TraducteurMartin
FinalitéCommuniquer, transmettre une information
DomaineRobotique, montage électrique/électronique
Langue(s)français deutsch english
License