La plate-forme collaborative de bricolages scientifiques et pédagogiques

Réalisation

  • Etape 4

    Report the diagram on a cardboard.

     

    Cut out the shape using a box cutter or a pair of scissors.

     

    The dotted lines should not be cut but only slightly marked with a punch and a ruller. They will be folded later.

     

    The upper part can be cut separately from the rest and attached with a piece of cardboard (see further).

     

    The two 12cm slots must be approximately 1 mm thick (if needed enlarge them with the help of an awl).


    Taille originale

0 Commentaire(s) | Ajouter