Etape 1Cut a rectangle into the bag of about 5 cm × 20 cm keeping two welded sides.
|
Etape 2Seal with adhesif the last large side to form a tube with a single opening
|
Etape 3In the cardboard, draw and cut an elephant head.
Cut a hole of approx. 3 cm in diameter between the tusks
|
Etape 4Drill a large hole in the cap of the bottle.
Push the cap about 2 cm into the tube and fold the edges of the tube inside.
|
Etape 5Pass the neck of the bottle through the hole of the elephant's head.
Screw the cap onto the bottle's neck.
With a marker add lines on the trunk.
|
Etape 6Roll up 2 to 3 cm of tube above the cap and fix it with adhesive tape.
Drill a large hole on the back side of the bottle.
|